■ 100% Silicone
■ Ideal for sealing high-build construction joints, aluminum, wood and glass perimeter joints
■ Excellent adhesion to common building substrates, including aluminum
■ Low VOC
■ Resistant to weathering
RTV silicone sealant monolithic alcohol-neutral cure. High performance elastic product developed for internal and external applications in perimeter sealing and sealing for most building substrates.
It is suitable for bonding and sealing porous and non-porous materials such as concrete, masonry, stone, ceramics, metal, anodized and painted aluminum, glass, polycarbonate, PVC, all usual construction joints with great movement.
| Color | Packaging | |
|---|---|---|
| Colorless | Cartridge 280mL |
| Method | Test | Unity | Result |
|---|---|---|---|
| ME-002 | Skin formation | min | 10 |
| ME-013 | Curing rate | mm/24h | 2 |
| ASTM D 792 | Density | g/cm3 | 1,01 |
| PROPERTY AFTER HEALING | |||
| ASTM D 2240 | Durometer Hardness | Shore A | 22 |
| ASTM D 412 | Tension at break | MPa | 1,3 |
| ASTM D 412 | Elongation at break | % | 400 |
| ME-015 | Temperature resistance | °C | -30 / +150 |
| ISSO 1160 | Handling capacity | % | 40 |
SURFACE PREPARATION
Surfaces must be firm, level and clean, free of dust and oils. Remove all wastes from materials, especially those that are not tightly adhered to the layers (sand, if necessary). Clean and degrease the surface with isopropyl alcohol and keep it dry before application. Do not use querosene or gasoline to clean the surfaces. In the case of applications on substrates other than those mentioned, it is recommended to carry out a test to evaluate the adhesion and compatibility of the sealant with the material.
HOW TO USE
Install support body or joint filler and protect substrates with masking tape for better finish. Cut the applicator nozzle at a 45° angle in the desired size and thickness. Apply the sealant to the area and immediately do the finishing with a spatula. After spatulation, remove the adhesive crepe tape. We recommend cleaning the tools before curing the product, because after curing the sealant is only mechanically removed.
■ 100% Silicone
■ Ideal for sealing high-build construction joints, aluminum, wood and glass perimeter joints
■ Excellent adhesion to common building substrates, including aluminum
■ Low VOC
■ Resistant to weathering
■ Not suitable for aquariums.
■ Do not apply to plastics based on polyethylene, polypropylene, nylon, acrylic and polytetrafluoroethylene.
■ Do not use on food contact parts and continuous immersion in media liquids.
■ Do not use on glass facades and any structural adhesion that needs resistance.
■ Does not accept painting.
■ Not suitable for use on natural stones.
■ Not suitable for bonding mirrors.
■ In an acidic or dark zone, the white silicone may change slightly to yellow. Under the influence of the sun, the silicone will resume its initial color.
■ It is strongly recommended not to apply the product with full incidence of direct sunlight as it will dry very quickly.
■ When using different reactive sealants, the first sealant must be completely cured before applying the next sealant.
The product should be kept in its original packaging and stored in a cool place at a temperature of 5 to 30°C, away from direct sunlight and away from heat sources. To avoid contamination of the unused product, do not return any leftover material in its original packaging. Keep out of reach of children and pets.
Validity (from the date of manufacture): 13 months.
