■ Ideal for fence and bonding in construction applications and general industry
■ Resistant to fungi and mold
■ Excellent adhesion in glass and aluminum
■ Low VOC
■ Low shrinkage
■ High elasticity
Silicone sealant RTV monocomponent of extended acetic curing. Contains fungicide. Thixotropic product that cures at room temperature through the humidity of the air and becomes a flexible rubber. Internal and external applications. Easy to apply.
General industrial sealant indicated for adhesion and sealing applications of aluminum, glass, tile, sanitary ware and bathroom stall.
| Color | Packaging | |
|---|---|---|
| White RAL9003 | Cartridge 280mL | |
| Light Grey RAL7037 | Cartridge 280mL | |
| Black RAL7037 | Cartridge 280mL |
| Method | Test | Unity | Result |
|---|---|---|---|
| ME-002 | Skin formation | min | 6 |
| ME-013 | Curing rate | mm/24h | 2 |
| ASTM D 792 | Density | g/cm3 | 0,98 |
| PROPERTY AFTER HEALING | |||
| ASTM D 2240 | Durometer Hardness | Shore A | 18 |
| ASTM D 412 | Tension at break | MPa | 1,0 |
| ASTM D 412 | Elongation at break | % | 300 |
| ME-015 | Temperature resistance | °C | -30 / +120 |
SURFACE PREPARATION
The surface must be dry, clean, free of dust and oils. Remove all wastes from materials, especially those that are not sufficiently adhered to the layers (sanding, if necessary). Clean and degrease the surface with isopropyl alcohol and keep it dry before application. It may be necessary to use primer to improve adhesion. For better finishing it is recommended to use adhesive tape in the lateral areas where the contact of the sealant is not intended. In the case of applications on substrates other than those mentioned in this bulletin, it is recommended to perform a test to evaluate the adhesion and compatibility of the sealant with the material.
HOW TO USE:
Cut the tip of the cartridge and cut the applicator nozzle at a 45° angle in the desired size and thickness. Screw the nozzle into the applicator cartridge and place in the applicator. Apply the silicone to the desired area and immediately do the finishing. In case of using tape remove it before the sealant forms the film. After use, keep the applicator nozzle in the cartridge and leave a small amount of product above the nozzle to form a tampon. In reuse, remove the plug. After open reuse the product in up to one week. Clean the tools before curing the product. After curing the silicone is only mechanically removed.
■ Ideal for fence and bonding in construction applications and general industry
■ Resistant to fungi and mold
■ Excellent adhesion in glass and aluminum
■ Low VOC
■ Low shrinkage
■ High elasticity
■ Do not use on rolled glass, corrosive metals, mirrors, painted surfaces, aquariums and concrete.
■ Do not apply to plastics based on polyethylene, polypropylene, polycarbonate, acrylic and polytetrafluoroethylene.
■ Do not use on food contact parts and continuous immersion in liquid media.
■ Do not use on glass facades and any structural adhesion you require resistance.
■ Does not accept painting.
The product should be kept in its original packaging and stored in a cool place at a temperature of 5 to 30ºC, away from direct sunlight and away from heat sources. To avoid contamination of the unused product, do not return any leftover material in its original packaging. Keep out of reach of children and pets.
Validity (from the date of manufacture): 13 months.
Except Bucket: 4 months.
