■ 100% Silicone
■ Ideal for expansion joints, movement joints, desolidarization joints and perimeter seals on façades
■ Sealing of glass and glass curtains on façades
■ Movement capacity up to ±50%
■ Excellent adhesion in mortars, ceramics, glass and aluminum
■ Low VOC
■ Weathering resistant
■ High performance
One-component RTV silicone sealant with alcoholic neutral cure fungicide. High performance product, 50% movement capacity, elastic and low modulus specially developed for sealing and perimeter sealing in facades, glass in general, ceramics and most construction substrates.
Suitable for movement joint sealing, desolidarization joints and facade expansion joints and seals in galvanized steel, anodized and painted aluminum, masonry, concrete, natural stones, ceramics, porcelain and glass.
Color | Packaging | |
---|---|---|
White RAL9003 | Cartridge 280mL | Sachet 600mL | |
Light Grey RAL7037 | Cartridge 280mL | Sachet 600mL | |
Dark Grey RAL7045 | Cartridge 280mL | Sachet 600mL | |
Lead Grey RAL7024 | Cartridge 280mL | Sachet 600mL | |
Beige RAL7032 | Cartridge 280mL | Sachet 600mL | |
Sand RAL1015 | Cartridge 280mL | Sachet 600mL | |
Bronze RAL8019 | Cartridge 280mL | Sachet 600mL | |
Black RAL9017 | Cartridge 280mL | Sachet 600mL |
Method | Test | Unity | Result |
---|---|---|---|
ME-002 | Skin formation | min | 12 |
ME-013 | Curing rate | mm/24h | 2 |
ASTM D 792 | Density | Density | 1,27 |
PROPERTY AFTER HEALING | |||
ASTM D 2240 | Durometer Hardness | Shore A | 28 |
ASTM D 412 | Tension at break | MPa | 1,6 |
ASTM D 412 | Elongation at break | % | 400 |
ME-015 | Temperature resistance | °C | -30 / +120 |
ASTM C 719 | Handling capacity | % | 40 |
SURFACE PREPARATION
Surfaces must be firm, level and clean, free of dust and oils. Remove all wastes from materials, especially those that are not tightly adhered to the layers (sand, if necessary). Clean and degrease the surface with isopropyl alcohol and keep it dry before application. Do not use querosene or gasoline to clean the surfaces. In the case of applications on substrates other than those mentioned, it is recommended to carry out a test to evaluate the adhesion and compatibility of the sealant with the material.
HOW TO USE:
Install support body or joint filler and protect substrates with masking tape for better finish. Cut the applicator nozzle at a 45° angle in the desired size and thickness. Apply the sealant to the area and immediately do the finishing with a spatula. After spatulation, remove the adhesive crepe tape. We recommend cleaning the tools before curing the product, because after curing the sealant is only mechanically removed.
■ 100% Silicone
■ Ideal for expansion joints, movement joints, desolidarization joints and perimeter seals on façades
■ Sealing of glass and glass curtains on façades
■ Movement capacity up to ±50%
■ Excellent adhesion in mortars, ceramics, glass and aluminum
■ Low VOC
■ Weathering resistant
■ High performance
■ Not suitable for wet surfaces, or which are continuously immersed in water or frozen.
■ Do not apply to plastics based on polyethylene, polypropylene, nylon, acrylic and polytetrafluoroethylene.
■ Do not use on parts that will have contact with food and continuous immersion in liquid media.
■ Do not use in areas requiring structural adhesion.
■ Does not accept painting.
■ Do not use on oil-releasing building materials, plasticizers or solvents, natural or partially vulcanised rubber sealing gaskets and tapes.
■ Not suitable for fully confined joints.
■ On porous bases, do not apply when the base temperature is below 5°C (41°F) and above 40°C (104°F).
■ On non-porous bases, do not apply if freezing of the base and temperature above 50°C (122°F) is observed.
The product should be kept in its original packaging and stored in a cool place at a temperature of 5 to 30ºC, away from direct sunlight and away from heat sources. To avoid contamination of the unused product, do not return any leftover material in its original packaging. Keep out of reach of children and pets.
Validity (from the date of manufacture): 13 months.
Except Bucket: 4 months.