■ Expansive polyurethane dispersion foam manual
■ Ideal for fixing in ducts and air conditioners, filling of door and window stops, ridges, thermal and acoustic insulation
■ Formulated for filling, insulation and sealing gaps, cracks and openings inside and outside buildings
■ 100% stable – does not shrink
■ High expansion
■ CFC free
Monocomponent product with good adhesion to various substrates, which accepts various finishes, such as joint compound, acrylic mass and paintings in general.
It is suitable for fixing in ducts and air conditioners, filling of door and window stops, roofs, thermal and acoustic insulation. Adheres in metal, wood, masonry, ceramics, marble and granite.
| Color | Packaging | |
|---|---|---|
| Yellowish | Can 500mL - 340g |
| Method | Test | Unity | Result |
|---|---|---|---|
| Skin formation | min | 7-15 | |
| Cutting time for finishing | min | 50-100 | |
| Total curing time | hrs | 24 | |
| Yield every 100g | lts | 5,2 | |
| Traction Resistence | Kpa (kgf/cm2) | 105,45 (1,075) | |
| Thermal Resistance (after curing) | °C | -40/+90 | |
| Termic Conductivity | mW/mK | 30-35 |
SURFACE PREPARATION: Surfaces must be clean, free of grease and dust residues. It is recommended to moisten the surface before application and protect the surrounding areas with newspaper.
HOW TO USE: The product should be applied at a temperature between 5 and 35°C. Before application, vigorously shake the vial, fit the applicator nozzle into the valve. Invert the packaging. Press the trigger to fill the voids to half, as the foam will expand. For long joints, apply on several fillets of a maximum of 4 cm and wait for the first one to dry before applying the next one. The application can be cut after 2 hours. It is recommended to use the entire contents of the bottle in one go. Uncured foam can be cleaned with PU remover.
■ Expansive polyurethane dispersion foam manual
■ Ideal for fixing in ducts and air conditioners, filling of door and window stops, ridges, thermal and acoustic insulation
■ Formulated for filling, insulation and sealing gaps, cracks and openings inside and outside buildings
■ 100% stable – does not shrink
■ High expansion
■ CFC free
■ Can not be used for structural assembly.
■ Do not apply to surfaces where there is direct contact with food or in areas with constant water immersion.
■ Do not use for structural glazing.
■ Do not use on joints where abrasion and physical abuse are constant.
■ Does not stick to some plastics, such as polyethylene, polypropylene and Teflon.
■ Incompatible with solvent-based contact glue.
Store in a dry and cool place with the packaging always face up. Do not expose to the sun and temperatures exceeding 50°C. Avoid keeping the product inside vehicles.
