■ Flame retardant
■ Secondary fence around fire doors and window frames
■ Fast healing, can be cut, sawed or formed within 60 minutes after application.
■ Fire resistance up to 120 min
Polyurethane foam, single component, CFC free, flame retardant. Good adhesion to various substrates, it accepts diverse finishes, like mass race, acrylic mass and paintings in general. It does not lose its properties due to the action of air humidity, it acts as a thermal insulation, it reduces sound transmission, besides not conducting electric current, acting as an electrical insulator. CFC-free product (chlorofluorocarbon).
It is suitable for secondary fence around doors and window frames against fires. Adheres in metal, wood, masonry, ceramics, marble and granite.
Color | Packaging | |
---|---|---|
Yellowish | Lata 500mL - 475g |
Method | Test | Unity | Result |
---|---|---|---|
Skin formation | min | 7-15 | |
Cutting time for finishing | min | 50-100 | |
Total curing time | hrs | 24 | |
Yield every 100g | lts | 5,2 | |
Traction Resistence | Kpa (kgf/cm2) | 105,45 (1,075) | |
Thermal Resistance (after curing) | °C | -40/+90 | |
Termic Conductivity | mW/mK | 30-35 |
HOW TO USE: The product should be applied at a temperature between 5 and 35°C. MANUAL APPLICATION: Prior to application, vigorously shake the bottle, fit the application nozzle to the valve. Invert the packaging. Press the trigger to start the application will fill in the voids by half, as the foam will expand. For long joints, apply on several fillets of a maximum of 4 cm and wait for the first one to dry before applying the next one. The application can be cut after 2 hours. It is recommended to use the entire contents of the bottle in one go. Uncured foam can be cleaned with PU remover.
■ Flame retardant
■ Secondary fence around fire doors and window frames
■ Fast healing, can be cut, sawed or formed within 60 minutes after application.
■ Fire resistance up to 120 min
■ Can not be used for structural assembly.
■ Do not apply to surfaces where there is direct contact with food or in areas with constant water immersion.
■ Do not use for structural glazing.
■ Do not use on joints where abrasion and physical abuse are constant.
■ Does not stick to some plastics, such as polyethylene, polypropylene and Teflon.
■ Incompatible with solvent-based contact glue.
Store in a dry and cool place with the packaging always face up. Do not expose to the sun and temperatures exceeding 50°C. Avoid keeping the product inside vehicles.