■ Seals non-porous surfaces in cold rooms, dividing panels, industrial and commercial air conditioning equipment, commercial and industrial displays and counters, clean rooms in general
■ Fungus resistant cured sealant
■ Resistant to staining and color change
Neutral cure one-component sealant. Thixotropic product that cures at room temperature through air humidity and becomes a flexible rubber. It retains its original properties even after years of exposure, without shrinking, cracking or peeling. Resistant to humidity and temperature.
It is suitable for bonding and sealing of porous and non-porous materials.
Indicated for fence of cold rooms, dividing panels, industrial and commercial air conditioning equipment, commercial and industrial counters and displays, clean rooms in general.
| Color | Packaging | |
|---|---|---|
| Colorless | Cartridge 280mL | |
| White RAL9003 | Cartridge 280mL | |
| Light Grey RAL7047 | Cartridge 280mL | |
| Black RAL9017 | Cartridge 280mL |
| Method | Test | Unity | Result |
|---|---|---|---|
| ME-002 | Skin formation | min | 8 |
| ME-013 | Curing rate | mm/24h | 2 |
| ASTM D 792 | Density | g/cm3 | 1,01 |
| PROPERTY AFTER HEALING | |||
| ASTM D 2240 | Durometer Hardness | Shore A | 18 |
| ASTM D 412 | Tension at break | MPa | 1,2 |
| ASTM D 412 | Elongation at break | % | 300 |
| ME-015 | Temperature resistance | °C | -30 / +180 |
SURFACE PREPARATION
The surface must be dry, clean, free of dust and oils. Remove all wastes from materials, especially those that are not sufficiently adhered to the layers (sanding, if necessary). Clean and degrease the surface with isopropyl alcohol and keep it dry before application. It may be necessary to use primer to improve adhesion. For better finishing it is recommended to use adhesive tape in the lateral areas where the contact of the sealant is not intended. In the case of applications on substrates other than those mentioned in this bulletin, it is recommended to perform a test to evaluate the adhesion and compatibility of the sealant with the material.
HOW TO USE:
Cut the tip of the cartridge and cut the applicator nozzle at a 45° angle in the desired size and thickness. Screw the nozzle into the applicator cartridge and place in the applicator. Apply the silicone to the desired area and immediately do the finishing. In case of using tape remove it before the sealant forms the film. After use, keep the applicator nozzle in the cartridge and leave a small amount of product above the nozzle to form a tampon. In reuse, remove the plug. After open reuse the product in up to one week. Clean the tools before curing the product. After curing the silicone is only mechanically removed.
■ Seals non-porous surfaces in cold rooms, dividing panels, industrial and commercial air conditioning equipment, commercial and industrial displays and counters, clean rooms in general
■ Fungus resistant cured sealant
■ Resistant to staining and color change
■ Not suitable for aquariums.
■ Do not apply to plastics* based on polyethylene, polypropylene, nylon®, acrylic and polytetrafluoroethylene.
■ Do not use on food contact parts and continuous immersion in liquid media.
■ Do not use on glass facades and any structural adhesion that needs resistance.
■ Does not accept painting.
The product should be kept in its original packaging and stored in a cool place at a temperature of 5 to 30ºC, away from direct sunlight and away from heat sources. To avoid contamination of the unused product, do not return any leftover material in its original packaging. Keep out of reach of children and pets.
Validity (from the date of manufacture): 13 months.
Except Bucket: 4 months.
