■ Single component adhesive sealant
■ Cure at room temperature when exposed to air humidity
■ Alcohol curing system
■ Does not drain, pasty consistency
■ Easy to apply
■ Heals forming a firm and flexible rubber
■ Excellent adhesion to different substrates
Extended neutral curing monolithic RTV silicone sealant. Alcohol-based, thixotropic product that cures at room temperature through air humidity, making it a firm and flexible rubber. No dripping, pasty consistency. Excellent adhesion to different substrates. Resistant to mold formation and weathering.
It is suitable for sealing galvanized steel, masonry and other porous and non-porous substrates, such as concrete, stone, ceramics, metal, anodized and painted aluminum, glass, polycarbonate and PVC.
| Color | Packaging | |
|---|---|---|
| White | ||
| Light Gray | ||
| Black |
| Method | Test | Unity | Result |
|---|---|---|---|
| ME-002 | Skin formation | min | 12 |
| ME-013 | Curing rate | mm/24h | 2 |
| ASTM D 792 | Density | g/cm3 | 1,27 |
| ASTM D 2240 | Durometer Hardness | Shore A | 28 |
| ASTM D 412 | Tension at break | MPa | 1,6 |
| ASTM D 412 | Elongation at break | % | 400 |
| ME-015 | Temperature resistance | °C | -30 / +120 |
SURFACE PREPARATION
The surface must be dry, clean, free of dust and oils. Remove all wastes from materials, especially those that are not sufficiently adhered to the layers (sanding, if necessary). Clean and degrease the surface with isopropyl alcohol and keep it dry before application. It may be necessary to use primer to improve adhesion. In the case of applications on substrates other than those mentioned in this bulletin, it is recommended to perform a test to evaluate the adhesion and compatibility of the sealant with the material.
HOW TO USE:
Cut the tip of the cartridge and cut the applicator nozzle at a 45° angle in the desired size and thickness. Screw the nozzle into the applicator cartridge and place in the applicator. Apply the silicone to the desired area and immediately do the finishing. In case of using tape remove it before the sealant forms the film. After use, keep the applicator nozzle in the cartridge and leave a small amount of product above the nozzle to form a tampon. In reuse, remove the plug. After open reuse the product in up to one week. Clean the tools before curing the product. After curing the silicone is only mechanically removed.
■ Single component adhesive sealant
■ Cure at room temperature when exposed to air humidity
■ Alcohol curing system
■ Does not drain, pasty consistency
■ Easy to apply
■ Heals forming a firm and flexible rubber
■ Excellent adhesion to different substrates
■ Not suitable for aquariums.
■ Do not apply to plastics* based on polyethylene, polypropylene, nylon®, acrylic and polytetrafluoroethylene.
■ Do not use on food contact parts and continuous immersion in liquid media.
■ Do not use on glass facades and any structural adhesion you require resistance.
■ Does not accept painting.
The product should be kept in its original packaging and stored in a cool place at a temperature of 5 to 30°C, away from direct sunlight and away from heat sources. To avoid contamination of the unused product, do not return any leftover material in its original packaging. Keep out of reach of children and pets.
Validity (from the date of manufacture): 13 months.
