■ One-component butyl sealant
■ Cure at room temperature
■ Easy to apply
■ Good adhesion
■ Good resistance to aging and U.V radiation
■ Possibility of later disassembly
Pasty butyl sealant with solvents. Thixotropic product that cures at room temperature through air humidity.
It is suitable for seals with possibility of further disassembly, such as buses, cars, trucks etc.
| Color | Packaging | |
|---|---|---|
| Black RAL9017 | Cartridge 280mL | |
| Light Grey RAL7047 | Cartridge 280mL |
| Method | Test | Unity | Result |
|---|---|---|---|
| ME-002 | Skin formation | min | 10 |
| ME-013 | Curing rate | mm/24h | 2 |
| ASTM D 792 | Density | g/cm3 | 0,96 |
| PROPERTY AFTER HEALING | |||
| ASTM D 2240 | Durometer Hardness | Shore A | 17 |
| ASTM D 412 | Tension at break | MPa | 1 |
| ASTM D 412 | Elongation at break | % | 300 |
| ME-015 | Temperature resistance | °C | -30 / +120 |
SURFACE PREPARATION
Surfaces must be clean, dry and free from dust and oil residue. In case of doubt, adhesion tests should be performed prior to application.
HOW TO USE:
Drill the cartridge nozzle membrane. Do not apply at temperatures below 10°C or above 35°C. The ideal application temperature for the substrate and the product is between 15°C and 25°C. Apply the product to the desired area and immediately do the finishing. In case of using tape remove it before it forms film. After use, leave a small amount of product above the nozzle to form a tampon. In reuse, remove the plug. After open reuse the product in up to one week. Clean tools before curing. After curing the product is only mechanically removed.
■ One-component butyl sealant
■ Cure at room temperature
■ Easy to apply
■ Good adhesion
■ Good resistance to aging and U.V radiation
■ Possibility of later disassembly
■ Do not use on rolled glass, corrosive metals, mirrors, painted surfaces, aquariums and concrete.
■ Do not apply to plastics based on polyethylene, polypropylene, polycarbonate, acrylic and polytetrafluoroethylene.
■ Do not use on food contact parts and continuous immersion in liquid media.
■ Do not use on glass facades and any structural adhesion that needs resistance.
■ Does not accept painting.
The product should be kept in its original packaging and stored in a cool place at a temperature of 5 to 30°C, away from direct sunlight and away from heat sources. To avoid contamination of the unused product, do not return any leftover material in its original packaging. Keep out of reach of children and pets.
Validity (from the date of manufacture): 13 months. Except Bucket: 4 months.
