■ Low thickness membrane
■ Ready to use
■ High productivity
■ Elastic membrane
■ Cold molded
■ Low VOC
■ Fast drying
STUHR POWER ELASTIC WP-155 is a ready-to-use aqueous acrylic copolymer emulsion that provides a waterproof barrier that can be confined under coatings or exposed. High performance single component polymer.
It is indicated as a waterproofing membrane for wet and wettable areas such as pools, balconies and baths. It is also suitable for waterproofing membrane with UV resistance.
| Method | Test | Unity | Result |
|---|---|---|---|
| ASTM E 70 | pH | 7 - 10 | |
| ME-013 | Viscosity | cP | 20.000 - 30.000 |
| ASTM D 792 | Density | g/cm3 | 1,15 - 1,30 |
| Solids | % | 65 - 67 |
SURFACE PREPARATION
The surface must be clean, free of loose particles, release agents, dust, cement cream and other contaminants. When necessary, the surface must be previously moistened, but not saturated. For high absorption smoothing mortars apply a primer with STUHR POWER ELASTIC itself.
HOW TO USE: PRIMER: Dash 1:4 by volume – 1 of STUHR POWER ELASTIC WP-155 and water. Membrane: Apply at least two coats without dilution of STUHR POWER ELASTIC WP-155. Use the structurant on corners, drains and bypasses when applying the second coat of the membrane. Consult the Waterproofing Project for the number of coats required and the locations that require the structure.
On smooth concrete surfaces, wash, brush or roughen the base to increase porosity and roughness. On mortar with lime or gravel, allow at least 28 days of cure for subsequent application of STUHR POWER ELASTIC WP-155. In confounded environments observe an area clearance interval of at least 5 days. In other areas after 48 hours, the tightness tests can be performed according to NBR 9574. Use the appropriate PPE for the application of adhesives, paints and cement mortars (gloves, glasses and boots). Keep the application environment well ventilated. Accidentally hit body parts require immediate washing. If swallowed, seek medical attention immediately.
■ Low thickness membrane
■ Ready to use
■ High productivity
■ Elastic membrane
■ Cold molded
■ Low VOC
■ Fast drying
The product should be kept in its original packaging and stored in a cool, well-ventilated place away from direct sunlight and away from heat sources. To avoid contamination of unused product, do not return any leftover material in its original packaging. Keep packaging closed to prevent skin formation.
Validity of 12 months from date of manufacture.
