■ Sealing in non-porous substrates
■ Resistance to aging, retraction, cracking and discoloration
■ High elasticity and flexibility
■ Low modulus
Acoustic curable, multipurpose silicone one-component sealant suitable for external and internal applications.
It is suitable for aluminum, glass, tile, sanitary ware and bathroom enclosure.
| Color | Packaging | |
|---|---|---|
| Colorless | Cartridge 280mL | |
| White RAL9003 | Cartridge 280mL | |
| Light Grey RAL7037 | Cartridge 280mL | |
| Black RAL9017 | Cartridge 280mL |
| Method | Test | Unity | Result |
|---|---|---|---|
| ME-002 | Skin formation | min | 10 |
| ME-013 | Curing rate | mm/24h | 2 |
| ASTM D 792 | Density | g/cm3 | 0,96 |
| PROPERTY AFTER HEALING | |||
| ASTM D 2240 | Durometer Hardness | Shore A | 17 |
| ASTM D 412 | Tension at break | MPa | 1 |
| ASTM D 412 | Elongation at break | % | 300 |
| ME-015 | Temperature resistance | °C | -30 / +120 |
SURFACE PREPARATION:
The surface must be dry, clean, free of dust and oils. Remove all wastes from materials, especially those that are not sufficiently adhered to the layers (sanding, if necessary). Clean and degrease the surface with isopropyl alcohol and keep it dry before application. Do not use kerosene or gasoline to clean surfaces. For better finishing it is recommended to use adhesive tape in the lateral areas of the joint where the contact of the product is not intended. In the case of applications on substrates other than those mentioned, it is recommended to carry out a test to evaluate the adhesion and compatibility of the product.
HOW TO USE:
Apply the product to the desired area and immediately finish. In case of using tape remove it before it forms film. After use, leave a small amount of product above the nozzle to form a tampon. In reuse, remove the plug. After open reuse the product in up to one week. Clean tools before curing. After curing the product is only mechanically removed.
■ Sealing in non-porous substrates
■ Resistance to aging, retraction, cracking and discoloration
■ High elasticity and flexibility
■ Low modulus
■ Do not use on rolled glass, corrosive metals, mirrors, painted surfaces, aquariums and concrete.
■ Do not apply to plastics based on polyethylene, polypropylene, polycarbonate, acrylic and polytetrafluoroethylene.
■ Do not use on food contact parts and continuous immersion in liquid media.
■ Do not use on glass facades and any structural adhesion that needs resistance.
■ Does not accept painting.
The product should be kept in its original packaging and stored in a cool place at a temperature of 5 to 30°C, away from direct sunlight and away from heat sources. To avoid contamination of the unused product, do not return any leftover material in its original packaging. Keep out of reach of children and pets.
Validity (from the date of manufacture): 13 months.
Except Bucket: 4 months.
