■ Ideal for moving joints and joints in concrete, masonry, wood, metal and PVC
■ Insulation around windows and doors, facades, stainless steel coatings
■ Suitable for external and internal applications
■ Good adhesion on various substrates
■ Resistant to weathering and aging
■ Can be used in climates with high temperatures
■ Solvent Free
■ Accepts painting
One-component RTV silicone sealant based on hybrid polymer with modified silanes. Thixotropic product that cures at room temperature through air humidity and becomes a flexible rubber. Can be applied in indoor and outdoor areas. Ideal for caulking and sealing. Accepts paint.
It is suitable for sealing and sealing of precast, metal panel, general concrete joints, movement joints, joints in buildings, steel, aluminum, glass, fiberglass, PVC masonry and ceramics. Also indicated for insulation around windows and doors, facades, among others.
| Color | Packaging | |
|---|---|---|
| White RAL9003 | Cartridge 280mL | Sachet 600mL | Bucket 25KG | |
| Light Grey RAL7037 | Cartridge 280mL | Sachet 600mL | Bucket 25KG | |
| Black RAL9017 | Cartridge 280mL | Sachet 600mL | Bucket 25KG |
| Method | Test | Unity | Result |
|---|---|---|---|
| ME-002 | Skin formation | min | 20 |
| ME-013 | Curing rate | mm/24h | 2 |
| ASTM D 792 | Density | g/cm3 | 1,66 |
| PROPERTY AFTER HEALING | |||
| ASTM D 2240 | Durometer Hardness | Shore A | 35 |
| ASTM D 412 | Tension at break | MPa | 1,2 |
| ASTM D 412 | Elongation at break | % | 150 |
| ME-015 | Temperature resistance | °C | -20 / +80 |
SURFACE PREPARATION
The surface must be dry, clean, free of dust and oils. Remove all wastes from materials, especially those that are not sufficiently adhered to the layers (sanding, if necessary). Clean and degrease the surface with isopropyl alcohol and keep it dry before application. It may be necessary to use primer to improve adhesion. For better finishing it is recommended to use adhesive tape in the lateral areas where the contact of the sealant is not intended. In the case of applications on substrates other than those mentioned in this bulletin, it is recommended to perform a test to evaluate the adhesion and compatibility of the sealant with the material.
HOT TO USE:
Install support body or joint filler and protect substrates with adhesive crepe tape for better finish. Indicated for application in metals / bodies. Cut the applicator nozzle at a 45° angle in the desired size and thickness. Apply the sealant to the area and immediately do the finishing with a spatula. After spatulation, remove the adhesive crepe tape. We recommend cleaning the tools before curing the product, because after curing the sealant is only mechanically removed.
■ Ideal for moving joints and joints in concrete, masonry, wood, metal and PVC
■ Insulation around windows and doors, facades, stainless steel coatings
■ Suitable for external and internal applications
■ Good adhesion on various substrates
■ Resistant to weathering and aging
■ Can be used in climates with high temperatures
■ Solvent Free
■ Accepts painting
■ Not suitable for aquariums.
■ Do not apply to plastics based on polyethylene, polypropylene, nylon, acrylic and polytetrafluoroethylene.
■ Do not use on food contact parts and continuous immersion in liquid media.
■ Do not use on glass facades and any structural adhesion that needs resistance.
■ Before painting, it is recommended to pre-test. Solvent-based paints and oils may be harmful to the product.
The product should be kept in its original packaging and stored in a cool place at a temperature of 5 to 30oC, away from direct sunlight and away from heat sources. To avoid contamination of the unused product, do not return any leftover material in its original packaging. Keep out of reach of children and pets.
Validity (from the date of manufacture): 13 months. Except Bucket: 4 months.
