■ Universal and indoor bonding and sealing
■ Permanent elasticity
■ Non-corrosive to metals
■ Good adhesion to most surfaces, including wet surfaces
■ Low VOC
Polymer-based one-component sealant with high-quality modified silanes. Thixotropic product with high initial tack that cures at room temperature through air humidity and becomes a flexible rubber.
Due to the high initial bond strength, it is suitable for fixing mirrors (according to ABNT NBR 15198) and bonding of vats, in addition to porous and non-porous materials such as metal, concrete, stone, ceramics, glass, polycarbonate, PVC, stone, concrete, glass, plasterboard, PU, rigid plastics, enamelled surfaces, ceramics, copper, lead, zinc, aluminum, metals, alloys, stainless steel, HPL, fiber cement and wood panels.
| Color | Packaging | |
|---|---|---|
| White RAL9003 | Cartridge 280mL | Sachet 600mL | Bucket 25kg | |
| Light Grey RAL7037 | Cartridge 280mL | Sachet 600mL | Bucket 25kg | |
| Black RAL9017 | Cartridge 280mL | Sachet 600mL | Bucket 25kg |
| Method | Test | Unity | Result |
|---|---|---|---|
| ME-002 | Skin formation | min | 5 |
| ME-013 | Curing rate | mm/24h | 3 |
| ASTM D 792 | Density | g/cm3 | 1,72 |
| PROPERTY AFTER HEALING | |||
| ASTM D 2240 | Durometer Hardness | Shore A | 50 |
| ASTM D 412 | Tension at break | MPa | 2,5 |
| ASTM D 412 | Elongation at break | % | 100 |
| ME-015 | Temperature resistance | °C | -20 / +80 |
SURFACE PREPARATION
The surface must be dry, clean, free of dust and oils. Remove all waste materials, especially those that are not sufficiently adhered to the layers. Clean and degrease the surface with alcohol and keep it dry before application. Do not use kerosene or gasoline to clean surfaces. In the case of applications on substrates other than those mentioned in this bulletin, it is recommended to carry out a test to evaluate the adhesion and compatibility of the product with the material.
HOW TO USE:
Cut the applicator nozzle at a 45° angle in the desired size and thickness. Apply the sealant to the area and immediately do the finishing with a spatula. After spatulation, remove the adhesive crepe tape. We recommend cleaning the tools before curing the product, because after curing the sealant is only mechanically removed.
■ Universal and indoor bonding and sealing
■ Permanent elasticity
■ Non-corrosive to metals
■ Good adhesion to most surfaces, including wet surfaces
■ Low VOC
■ Not suitable for aquariums.
■ Do not apply to polyethylene, polypropylene, nylon, acrylic and polytetrafluoroethylene based plastics.
■ Do not use on food contact parts and continuous immersion in liquid media.
■ Do not use on glass facades and any structural adhesion that requires resistance.
■ Before painting, it is recommended to pre-test. Solvent-based paints and oils may be harmful to the product.
■ Do not use on movement joints and facades of buildings.
The product should be kept in its original packaging and stored in a cool place at a temperature of 5 to 30ºC, away from direct sunlight and away from heat sources. To avoid contamination of the unused product, do not return any leftover material in its original packaging. Keep out of reach of children and pets.
Validity (from the date of manufacture): 13 months.
Except Bucket: 4 months.
