■ Ideal for assembling any type of material such as wood, stone, metal and many plastics
■ Ideal for fixing slats, baseboards, thresholds, window sills, sheets, wainscoting, lining slats, finishing slats, gutters, nameplates, door numbers, wall cladding boards, panels, ceramic tiles, plugs and junction boxes
■ Applicable both indoor and outdoor
■ Fixation of non-porous materials and materials under tension
■ No use of nails or screws
Adhesive based acrylic with fungicide suitable for extra strength bonding in internal areas on a wide variety of substrates. Product with immediate fixation, highly resistant, replacing the use of nails and adhesive tapes.
It is suitable for bonding wood, MDF, plywood, plaster, drywall, concrete, metal and many plastics on any surface of stone, masonry, expanded polystyrene, ceramic, stucco etc. Ideal for fixing slats, baseboards, thresholds, window sills, sheets, wainscoting, lining slats, finishing slats, gutters, nameplates, door numbers, wall cladding plates, panels, ceramic tiles, plugs and junction boxes.
Note: Collages should always contain at least one porous substrate.
| Color | Packaging | |
|---|---|---|
| White RAL9003 | Cartridge 280mL |
| Method | Test | Unity | Result |
|---|---|---|---|
| ME-002 | Skin formation | min | 10 |
| ME-013 | Curing rate | mm/24h | 2 |
| ASTM E 70 | ph | 9,5 | |
| ASTM D 792 | Density | g/cm3 | 1,51 |
| PROPERTY AFTER HEALING | |||
| ASTM D 412 | Tension at break | MPa | 2,5 |
| ASTM D 412 | Elongation at break | % | 50 |
| ME-015 | Temperature resistance | °C | -20 / +60 |
SURFACE PREPARATION
Surfaces must be firm, level and clean, free of dust and oils. Remove all wastes from materials, especially those that are not tightly adhered to the layers (sand, if necessary). Clean and degrease the surface with isopropyl alcohol and keep it dry before application. Do not use querosene or gasoline to clean the surfaces. In the case of applications on substrates other than those mentioned, it is recommended to carry out a test to evaluate the adhesion and compatibility of the sealant with the material.
HOW TO USE
Cut the tip of the cartridge, thread the nozzle and cut at a 45° angle in the desired size and thickness. Place the cartridge in the applicator and apply the adhesive in small cords, dots or with a notched spatula. Excess product impairs drying and initial fixation efficiency. The amount of product will depend on the area of the parts, the weight and the effort that the assembly must support. Join the parts and press. When applied on heavy or weight bearing parts, use support pads or tape and maintain until complete cure. Remove excess product with damp cloth. Clean the tools before curing the product with water. After curing the adhesive is only mechanically removed.
■ Ideal for assembling any type of material such as wood, stone, metal and many plastics
■ Ideal for fixing slats, baseboards, thresholds, window sills, sheets, wainscoting, lining slats, finishing slats, gutters, nameplates, door numbers, wall cladding boards, panels, ceramic tiles, plugs and junction boxes
■ Applicable both indoor and outdoor
■ Fixation of non-porous materials and materials under tension
■ No use of nails or screws
■ Do not use in mirrors and aquariums.
■ Do not apply to polyethylene, polypropylene, nylon, acrylic and polytetrafluoroethylene based plastics.
■ Do not use on food contact parts and continuous immersion in liquid media.
■ Do not use on glass facades and any structural adhesion that requires resistance.
■ Do not use on surfaces that eliminate oil, plasticizers or solvents, such as wood immersed in oil, surfaces when wet, walls with coating in the process of stripping.
■ Before painting, it is recommended to pre-test. Solvent-based paints and oils may be harmful to the product.
The product should be kept in its original packaging and stored in a cool place at a temperature of 5 to 30ºC, away from direct sunlight and away from heat sources. To avoid contamination of the unused product, do not return any leftover material in its original packaging. Keep out of reach of children and pets.
Validity (from the date of manufacture): 18 months.
